Silicone rubber insulators China are often used on the pulling wires. The function of the silicone rubber insulators China is to prevent electric shocks from being injured when the grounding is unqualified, which plays a certain role in safety.
How to maintain and manage silicone rubber insulators China?
In wet weather conditions, dirty silicone rubber insulators China are prone to flashover discharge, so they must be cleaned to restore the original insulation level. The general area is cleaned once a year, and the polluted area is cleaned twice a year (once before the fog season).
1. Power outage cleaning
Power outage cleaning means that after the line power outage, workers climb up the pole and wipe it with a rag. If it is not cleaned, it can be wiped with a damp cloth or detergent. If it is still not cleaned, the silicone rubber insulator China should be replaced or a synthetic insulator should be replaced.
2. Cleaning without power failure
Generally, use an insulating rod equipped with a brush or tied with cotton yarn to wipe the silicone rubber insulator China on the running line. The electrical performance and effective length of the insulating rods used, and the distance between people and live parts should comply with the regulations of the corresponding voltage level, and special personnel must be supervised during operation.
3. Rinse with charged water
There are two methods of large water flushing and small water flushing. The flushing water, the effective length of the operating rod, and the distance between people and live parts must meet the requirements of the industry regulations.
